Tecnogas

Buzzer / Light Mod SIRE-LAMP combined with all the detectors. Available in various voltages

The DIN rail stations Mod CRD There ntrali for DIN DIN bar crd crd master board with microprocessor applications are addressed in thermal power stations, commercial and industrial use, where monitoring is required from 1 to 4 gas sensors, or up to 10 sensors smoke and / or fire by area.
Mounted on DIN-3 modules for version 1 and 2 zones, with 6 modules for version 3 and 4 zones.


TECHNICAL DATA
• Complies with EN 50271
• 230 Vac or 12 Vdc with internal power supply with external power supply
• 1 output relay with dry contacts (alarm + .....)
• Complete Buzzer, Power, Test-reset button, visual indication of: system fault, sensor fault, alarm sensor
• 12 Vdc power to the sensor

Detector The detector Remote Remote RMP RMP can be used in both civil and industrial sectors.
It is powered directly from the Central CRD and is housed inside the sensor module EMS.
Catalytic

TECHNICAL DATA
• Complies with EN 50271
• IP 55 protection
• Sensor module in EMS
• Power supply: 12 Vdc

Battery back up battery power for safety systems in case of power failure

External power supply switching for maintenance charging of battery and / or control gas valve 12/24 Volt. • Power supply 50 ÷ 230 Vac 12/24 Hz • Output 60 Volts DC 25W

Version with sample gas canister valve dosed jet, used for test-detector test on LPG and CNG

Smoke detectors, fire detectors and thermal EN 54
PRF42 series detectors are proposed to complement the range of gas detectors and are adapted to be connected to our central CRD Series Gas and Fire.
PRF42 The detectors are equipped with a universal base necessary to facilitate the installation and subsequent maintenance activities.
The detectors are fully interchangeable with each other, offer a high standard of reliability and are compatible with most standard fire protection systems.


Code 503440 - PRF401 Base
Code 503442 - Thermostatic PRF423 analogue
Code 503443 - Optical Smoke Detector PRF421 analogue

Gas detectors Gas detectors RMP EX Explosion Proof, Certificate No. EX-Cesi 98.067X / N The line ADP, particularly suitable for applications in environments with potentially explosive atmosphere, includes a wide range of certified flameproof detector CESI EX dll C T6 ( Certificate No. EX-98.67X / N).
Models equipped with catalytic sensors and transmitter signal (S), programmable output positive or negative, are suitable for the detection of combustible gases (methane, LPG, pentane, benzene vapor, acetylene, hydrogen, ammonia, etc..).
All detectors can be supplied with a voltage between 10 and 30 Vdc. The detector output signal to ADP with step 4 - 12 - 20 mA signal output current independent of load and supply voltage can be connected ...